0161 799 2200
High-Quality
APMG Plastics manufactures venturi wet scrubbers which are used where condensation of liquids or metallic vapours occurs or when chemical reactions result in the formation of a fine fume such as ammonium chloride.
Register Your Interest
Our friendly, professional team is waiting to help you with all your wet scrubbers enquiries.
Based on decades of practical experience, APMG Plastics is able to supply a range of Venturi fume scrubber designs for use where very small (1 – 5 µ) or sub-micron (0.05 – 0.9 µ) particulates must be removed from the air stream. High pressure drops (1 Kpa – 12.5 Kpa) are required and the smaller the particulate the higher the pressure drop.
Processes which would employ this type of wet scrubber are those where condensation of liquids or metallic vapours occurs or when chemical reactions result in the formation of a fine fume such as ammonium chloride.
A Venturi fume scrubber consists of an external venture section and a separator. Gas and liquid streams are accelerated through the Venturi throat, causing the particulates and scrubbing liquor to agglomerate into droplets of sufficient size to be separated from the stream by the separator.
A major advantage of this type of unit is its simplicity with no internal devices that can block.
Speak to our friendly team of experienced designers who can advise on which Venturi fume scrubber is appropriate for your needs.